|
(3) The quick device
The
usage: used on the radar or the radiometer
3.1 The quick switch: The frequency from
Band K to Band S
The isolation : 25dB
The Inse.Loss: 0.3dB
3.2 Nonreciprocal Latching Phase Shifter
The frequency from Band K to Band S
The phase stepping grade: 3digit
4digit 5digit 7digit
The Inse.Loss 0.8dB
The switchover time 3-15μs
(4) The rotator
of polarization plane
The
usage: used on the satellite receiving system for the family on ground
The technical index: The frequency: 11GHz
The rotational angle: 45°
The Inse.Loss: 0.5dB
(5) The Circulator and the isolator used on the
communication Band
The
usage: used on the microwave communication system
The technical index: The frequency: 4000MHz, 160MHz, 80MHz
The isolation: 20-30dB
The Inse.Loss: 0.2-0.3dB
(6) The high
power waveguide Junction Circulator
The
usage: normally be used as the isolator, the transcribing switch, or can
be used to substitute the Differential Phase Shift Circulator, for the
series of the products, all the isolation ratio are more than 20dB, and
the standing wave ratio are less than 1.2, and other index are as the
following.
|
The range of
the frequency |
The peak power
value |
The average
value of the power |
The Maximum
Loss (dB) |
|
4.8-6GHz |
300KW |
300W |
0.5 |
|
500KW |
500W |
0.35 |
|
750KW |
800W |
0.35 |
|
2.55-3.6GHz |
1MW |
1000W |
0.5 |
|
1.2MW |
2000W |
0.6 |
|
2MW |
2000W |
0.6 |
(7)
The S Band Differential Phase Shift Latching Switch Circulator:
The exciting power is from 2W to 4W, and can be used on the power program
control or as the switch and the isolator. The peak / average value is
200KW/2KW, the Band Width is 10%; the reversed isolation is more than
20dB, the forward loss is less than 0.8dB, the standing wave coefficient
is 1.2, and the switching time is 10
μs.
(8) The 3 cm
ferrite switch circulator: this
product can be used to substitute the gaseous discharge tube, and can be
used as the common channel converter on the radar or the microwave
communication system, the switching speed and the reliability are much
improved. The peak power is more than 80KW, and the average power more
than 80 W.
(9) The S Band ferrite: electric modulated attenuator
The
usage: it is widely used on the test circuitry of the microwave, can be
used as the program control attenuator with high reliability, and the Band
width is +/-15%, the Inse.Loss is less than 0.5dB, the dynamic attenuation
is more than 60dB, the standing wave coefficient is 1.3.
(10)
The nonreciprocal Latching Phase Shifters
The usage: this product is used as the phase regulator to make the phase
balanceable 6μs.
The frequency range is from 2.7-3.05GHz, the Inse.Loss is 1 dB, and the
shifting time is less than 6μs,
the converting energy is 500μJ,
the peak power is 60 KW, the average power is 60W, the standing wave ratio
is 1.3.
(11) The
stripline circulator and isolator: the frequency is from 2500MHz to
3500MHz, the Inse.Loss is 0.2dB, the isolation is 25dB, the standing wave
ratio is 1.2, the Band width is 20%.
(12) The ferrite
microstrip isolator: the
frequency range is L,S,C,X Bands, the Inse.Loss is 0.3-0.5dB, the
isolation is more than 20dB, the standing wave ratio is 1.3, the bandwidth
is from 20% to 30%.
(13) Flange
isolator: that is the T junction
circulator, the volume is less than the field shift parts, and is lighter,
the Inse.Loss is less than 0.2dB, the isolation is 25dB, the standing wave
coefficient is 1.15, the bandwidth is 6%.
(14)
The three ends stripline switch : the
frequency is from 2 to 6GHz, the switching time is 3μs,
the bandwidth is 10%, the Inse.Loss is less than 0.4dB, the isolation is
much than 20dB, the standing waver ratio is less than 1.25, the switching
energy is less than 500μJ,
the regulating frequency is from 50 to 5000Hz.
NEW
WAVEGUIDE PRODUCTS >>> |
